The Charles Schwab Lone Tree Campus was a $240,000,000 mammoth consisting of 3 office buildings of five stories each. These buildings comprise 650,000 square feet of office space, which can accommodate an additional 2,900 workers, with room for more buildings, if needed, on the 47 acres, Charles Schwab owns.
Read More
The BURNCO team worked together to ensure the G3 Grain Terminal project was completed without problems. BURNCO conducted test slip form pours to predict the set time and slip rates for the silo construction.
Read More
Large overlay project, including high-profile areas such as the new Ice District in front of Rogers Place Downtown Edmonton.
Read More
Outdoor tennis court re-surfacing for the City Of Edmonton Kinsmen facility located at Walterdale road.
Read More
The new bridge will provide three northbound lanes and enhanced cyclist and pedestrian access crossing the North Saskatchewan River.
Read More
The Judicial Center was built to serve as a 100-year building for the Colorado State Court system. Its design and construction honour the legacy of the state court system while providing a facility that can accommodate the Court's future.
Read More
CSU's South College Avenue Parking Garage is a 222,000-square-foot, 662-car, four-story structure on the southeast corner of the Colorado State University campus.
Read More
BURNCO worked with Adolfson & Peterson and the MVER product manufacturer to coordinate the needs of the product. We also suggested and poured a test slab to validate the mix with the product and made daily adjustments to ensure the concrete finishers could give CSU a quality end product.
Read More
Setting the bar higher by pouring 68,800 yd³ of high-quality concrete for the largest industrial building in Colorado that extends 2,400,000 sq. ft. over 80 acres.
Read More
To create a rich and homogeneous surface for this project, we produced a fine-graded mix of approximately 60 metric tonnes of asphalt. This project consisted of a shared twin driveway. Both the owner and contractor were pleased with our product.
Read More
St. Anthony Hospital is a 673,000 sq. ft., 563-bed level 1 trauma facility. The new St. Anthony Hospital was constructed in the Denver Federal Center in Lakewood, CO. This new location better provides coverage and patient care for the west side of the metro area.
Read More
PAR 1085 addition was part of upgrading the aging 1960s-era treatment facility by adding capacity, improving operating capability, and upgrading treatment methods to meet more stringent effluent requirements for nitrogen and ammonia removal, as required by the district's discharge permit.
Read More
1601 Wewatta is a 280,000 sq. ft. office building for Denver's Union Station district. The 10-story project is located at the corner of 16th and Wewatta in the Denver metro area's hottest real estate market: Downtown Denver's Union Station district.
Read More
As a part of Denver's massive Union Station Transit Center project, this project was on one of the prime development sites with an L-shaped parcel located at the east corner of 16th and Wewatta Street.
Read More
Stapleton Business Center North is a three-building project with a development of approximately 1 million sq. ft. in Prologis Park Stapleton. It was the first large-scale redevelopment at the former Stapleton International Airport.
Read More
The Pinnacle is a 27-story, two-tower, luxury residential development in Denver, Colorado. Many concrete mix designs were utilized on this project, from high strength 8,000 psi shear walls and columns to 5500 psi post-tensioned slabs with a total concrete use of 20,000 yd³.
Read More
A $156 million iconic expansion project where BURNCO delivered 2,270 tons of sandstone and limestone with a total of 3,000+ workers in 550 days.
Read More
Rangeview Majestic is a 122,500 sq. ft. industrial building. BURNCO developed a 1½” aggregate mix and placed superior quality floor slabs at a rate of 200 yd³ at an accelerated schedule to meet the developer’s expectations.
Read More
The hospital has 840,000 sq. ft. of new diagnostic, treatment and patient care spaces. With challenges like Strict construction work hours, tight spaces, and traffic, BURNCO delivered 65,000 yd³ of concrete to keep the project on schedule successfully.
Read More
A decorative project – BURNCO collaborated with the artist to devise a plan for a concrete flowable enough to get into all the crevices of the intricate design. This project also used an array of colors, including green concrete, which adds a pleasing aesthetic to the front of the building.
Read More
